Shown: Lapis
Los Angeles ApparelStyle FF3001 · T-Shirts
Women's USA-Made 50/50 T-Shirt
A blank t-shirt from the Los Angeles Apparel line, offered in 2 colors and sizes S–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 combed ring-spun cotton/polyester at 3.7 oz/yd²
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Lapis
Lapis
Red
Available sizes
Availability — Lapis
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | Limited | — | |
| L | In Stock | — | |
| XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 combed ring-spun cotton/polyester
- Fabric weight
- 3.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- combed · ring-spun
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–XL
- Colors
- 2
- Country of origin
- Currently unavailable
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–XL.
Fabric and construction
Manufacturer highlights
- 3.7 oz./yd², 50/50 combed ring-spun cotton/polyester
- Made in USA
Country of origin
Made in Currently unavailable.
Shown for the Lapis colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/50 combed ring-spun cotton/polyester
- · Similar weight (4.2 vs 3.7 oz)
- · Same fabric: 50/50 combed ring-spun cotton/polyester
- · Similar weight (3.7 vs 3.7 oz)
- · Similar fiber mix
- · Similar weight (4.1 vs 3.7 oz)
- · Covers XXS–2XL
- · Similar fiber mix
- · Similar weight (4.13 vs 3.7 oz)
- · Covers XXS–2XL
Terms used on this page
- Combed Cotton
- Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.