Shown: Black Aqua
Los Angeles ApparelStyle FF01 · T-Shirts
Unisex USA-Made 50/50 Poly/Cotton T-Shirt
A blank t-shirt from the Los Angeles Apparel line, offered in 11 colors in size XS. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 polyester/combed ring-spun cotton at 3.7 oz/yd²
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black Aqua
Black Aqua
Heather Black
Heather Cranberry
Heather Forest
Heather Kelly Green
Heather Lake Blue
Heather Plum
Heather Red
Lapis
Navy
Red
Available sizes
Availability — Black Aqua
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 polyester/combed ring-spun cotton
- Fabric weight
- 3.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- combed · ring-spun
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS
- Colors
- 11
- Country of origin
- Currently unavailable
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS.
Fabric and construction
Manufacturer highlights
- 3.7 oz./yd², 50/50 polyester/combed ring-spun cotton
- Ribbed neckband
- Made in USA
Country of origin
Made in Currently unavailable.
Shown for the Black Aqua colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Similar fiber mix
- · Similar weight (3.7 vs 3.7 oz)
- · Covers XS
- · Similar fiber mix
- · Similar weight (4.2 vs 3.7 oz)
- · Covers XS–XL
- · Similar fiber mix
- · Similar weight (4.2 vs 3.7 oz)
- · Similar fiber mix
- · Similar weight (4.2 vs 3.7 oz)
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Combed Cotton
- Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.