
Shown: Washed Black
LATStyle 6935 · Sweatshirts
Unisex Vintage Wash Crewneck Sweatshirt
A blank crewneck sweatshirt from the LAT line, offered in 11 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 ring-spun cotton/polyester at 7 oz/yd²
- OEKO-TEX certified facility
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Washed Black
Washed Black
Washed Grey
Washed Natural
Washed Navy
Washed Rouge
Washed Saltwater
Washed Tradewind
Weathered Military Green
Weathered Coyote Brown
Weathered Mauvelous
Weathered Plum
Available sizes
Availability — Washed Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 ring-spun cotton/polyester
- Fabric weight
- 7 oz/yd²
- Fabric type
- jersey
- Yarn
- ring-spun
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 11
- Country of origin
- Pakistan
- Sustainability
- OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 19 1/2 | 24 1/2 | 25 | 25 1/2 | 26 | 26 1/2 |
| Sleeve Length | 24 | 24 1/2 | 25 | 25 1/2 | 26 | 26 1/2 |
| Suggested Imprint Area | 18 1/2"W x 26"H | 18 1/2"W x 26"H | 18 1/2"W x 26"H | 28 1/2"W x 31"H | 28 1/2"W x 31"H | 28 1/2"W x 31"H |
Fabric and construction
Manufacturer highlights
- 7 oz./yd², 50/50 ring-spun cotton/polyester
- Ribbed collar
- Ribbed v-notch at neck
- Back locker patch
- Jersey back neck tape
- Ribbed cuffs and bottom band
- Raw edge seam at sleeve cuffs
- Coverstitch at seams
- Side seams
- EasyTear™ label
- Responsible Supplier: this product was made in a facility that is OEKO-TEX certified
About this blank
The Live & Tell Vintage Wash assortment achieves its authentic look and feel through a special wash process, which creates unique and natural variances in texture, distress, and shade. These are intentional and are NOT considered defective.
Country of origin
Made in Pakistan.
Shown for the Washed Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (7.5 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- V-notch (V-insert)
- A V-notch, or V-insert, is a small triangular rib patch set into the collar of a crewneck sweatshirt, a retro detail signaling a heavier, premium vintage-style blank.
- Locker Patch (Half-Moon Patch)
- A locker patch, or half-moon patch, is a curved fabric panel sewn at the inside back neck of a garment, a construction cue often paired with small embroidery.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.