Shown: Black
Lane SevenStyle LS18002 · Hoodies
Unisex Future Hoodie Sweatshirt
A blank hooded sweatshirt from the Lane Seven line, offered in 4 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/45 cotton/polyester regenerated fleece at 7.96 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Heather Charcoal
Heather Grey
Navy
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/45 cotton/polyester regenerated fleece
- Fabric weight
- 7.96 oz/yd²
- Fabric type
- fleece
- Yarn
- 30 singles
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Classic
- Sizes
- XS–3XL
- Colors
- 4
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Classic fit, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
| Chest Width (Laid Flat) | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| Sleeve Length | 23 1/2 | 24 | 24 1/2 | 25 | 25 1/2 | 26 | 26 1/2 |
Fabric and construction
Manufacturer highlights
- 7.96 oz./yd², (270 GSM) 55/45 cotton/polyester regenerated fleece, 30 singles
- Regular fit
- Two-panel fleece-lined hood
- Double-needle top stitch on all seams
- Dyed-to-match drawcords with tipped ends
- Metal eyelets
- Side seams
- Tear away label
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8.25 vs 7.96 oz)
- · Classic fit
- · Similar fiber mix
- · Similar weight (7.6 vs 7.96 oz)
- · Classic fit
- · Similar fiber mix
- · Similar weight (8 vs 7.96 oz)
- · Classic fit
- · Similar fiber mix
- · Similar weight (8 vs 7.96 oz)
- · Classic fit
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.