Shown: Lime
Unisex Black Bottom Class 2 T-Shirt
A blank t-shirt from the Kishigo line, offered in Lime and sizes M–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.1 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Lime
Lime
Available sizes
Availability — Lime
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | In Stock | — | |
| L | Limited | — | |
| 3XL | Out of Stock | — | |
| 4XL | Limited | Available | |
| 5XL | Low Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.1 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- M–5XL
- Colors
- 1
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes M–5XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|
| Body Length | 30 1/2 | 31 | 31 | 32 | 33 | 34 | 35 |
| Chest Circumference | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 |
Fabric and construction
Manufacturer highlights
- 4.1 oz./yd², 100% polyester birdseye
- Microfiber moisture-management fabric
- 2” wide high-performance reflective material
- Black bottom front to keep t-shirt appearance clean and professional
- Lower inside microfiber patch for cleaning safety glasses
- Left chest pocket
- ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R | Class 2
- Fabric dye lot variances may occur and meet luminance factor as stated in the standard
About this blank
WARNING:This Product can expose you To chemicals including Di(2-ethylhexyl)phthalate (DEHP) which Is/are known To the State Of California To cause cancer And/Or birth defects And other reproductive harm. For more information, go towww.P65Warnings.ca.gov
Country of origin
Made in Viet Nam.
Recommended applications
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (3.7 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.13 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.1 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.1 vs 4.1 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Dye lot
- A dye lot is a batch of fabric dyed together under one recipe — reorder the same color and the new batch can still land a shade off.