Shown: Lime
KishigoStyle 91349135 · Long Sleeve Tees
Unisex Premium Black Series® Long Sleeve T-Shirt
A blank long sleeve tee from the Kishigo line, offered in 2 colors and sizes M–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.13 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Lime
Lime
Orange
Available sizes
Availability — Lime
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | Limited | Available | |
| 5XL | Limited | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.13 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- M–5XL
- Colors
- 2
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes M–5XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|
| Body Length | 29 1/5 | 29 1/2 | 30 | 31 | 32 | 33 | 34 |
| Chest Circumference | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 |
Fabric and construction
Manufacturer highlights
- 4.13 oz./yd², 100% polyester birdseye
- Microfiber moisture-management fabric
- Black sides provide visual contrast
- Left chest pocket
- Lime (9134), Orange (9135), Fluorescent Red (9710)
- ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R | Class 3
- Fabric dye lot variances may occur and meet luminance factor as stated in the standard
About this blank
2” wide high performance breathable reflective tape significantly reduces hot spots and provides greater flexibility over solid tapes
WARNING:This Product can expose you To chemicals including Di(2-ethylhexyl)phthalate (DEHP) which Is/are known To the State Of California To cause cancer And/Or birth defects And other reproductive harm. For more information, go towww.P65Warnings.ca.gov
Country of origin
Made in Viet Nam.
Shown for the Fluorescent Red (9710) colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.13 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.13 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.13 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.13 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Dye lot
- A dye lot is a batch of fabric dyed together under one recipe — reorder the same color and the new batch can still land a shade off.