
Shown: Washed Navy
Unisex Rugged Full-Zip Hooded Sweatshirt
A blank hooded sweatshirt from the JERZEES line, offered in Washed Navy in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 69/31 cotton/polyester at 12 oz/yd²
- US-grown / BCI cotton
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Washed Navy
Washed Navy
Available sizes
Availability — Washed Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 69/31 cotton/polyester
- Fabric weight
- 12 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XL
- Colors
- 1
- Country of origin
- Honduras, El Salvador
- Sustainability
- US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | XL |
|---|---|
| Body Length | 30 |
| Chest Width (Laid Flat) | 26 |
| Sleeve Length (From Center Back) | 37 1/2 |
Fabric and construction
Manufacturer highlights
- 12 oz./yd², 20 oz./L yd (CA), 69/31 cotton/polyester
- Athletic Heather is 65/35 CVC cotton/polyester
- Made with sustainably-sourced USA grown cotton
- Pre-shrunk
- Heavyweight 3-end fleece
- Pill-resistant
- 1-ply hood with grommets
- Matching tipped and knotted drawcord
- Two-needle coverstitched neck, armholes, and waistband
- Aluminum zipper
- Pouch pocket
- 1x1 ribbed cuffs and waistband with spandex
- Tear-away label
Country of origin
Made in Honduras or El Salvador.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 69/31 cotton/polyester
- · Similar weight (12 vs 12 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- CVC (Chief Value Cotton)
- CVC (Chief Value Cotton) is a cotton-dominant yarn blend, usually 60% cotton and 40% polyester, built to keep cotton's soft hand while adding shrink and pill resistance.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Grommet (Eyelet)
- A grommet, or eyelet, is the metal or sewn ring set into fabric where a drawcord passes through, a small hardware detail that signals a higher-quality hoodie build.