Shown: Burnt Orange
Youth NuBlend® Hooded Sweatshirt
A blank hooded sweatshirt from the JERZEES line, offered in 10 colors and sizes S–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester at 8 oz/yd²
- Sustainability program stated by manufacturer
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 10— Burnt Orange
Burnt Orange
Charcoal Grey
Deep Purple
Maroon
Safety Green
True Red
Vintage Heather Blue
Vintage Heather Navy
Vintage Heather Red
White
Available sizes
Availability — Burnt Orange
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Inventory Unavailable | — | |
| M | Inventory Unavailable | — | |
| L | Inventory Unavailable | — | |
| XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- S–XL
- Colors
- 10
- Country of origin
- Honduras, El Salvador
- Sustainability
- Sustainability program stated by manufacturer
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes S–XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL |
|---|---|---|---|---|
| Body Length | 21 1/2 | 22 1/2 | 25 | 26 1//2 |
| Chest Width (Laid Flat) | 17 | 18 | 19 | 20 |
| Sleeve Length (From Center Back) | 25 | 27 3/4 | 30 1/4 | 32 3/4 |
Fabric and construction
Manufacturer highlights
- 8 oz./yd² (US), 13.3 oz/ L yd (CA), 50/50 cotton/polyester
- Oxford is 48/52 cotton/polyester
- Pre-shrunk
- NuBlend® pill-resistant fleece
- High-stitch density for a smooth printing canvas
- 2-ply hood
- No drawcord
- Double-needle stitched neck, armholes, and waistband
- Pouch pocket
- 1x1 ribbed cuffs and waistband with spandex
- Quarter-turned
- Tear away label
- CPSIA compliant tracking label
- This product meets the following Sustainable Style subcategories:
- Sustainable Manufacturing
- Socially Conscious Manufacturing
- Responsible Mindset
Country of origin
Made in Honduras or El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (7.8 vs 8 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Anti-Pill Fleece
- Anti-pill fleece is fleece treated or engineered to resist forming the small fiber balls that build up on regular fleece after repeated washing and wear.
- Canvas (Duck Cloth)
- Canvas (duck cloth) is a heavy plain-weave cotton or cotton-blend fabric, typically 7-12 oz, used for totes, aprons, and workwear beyond t-shirts.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.