Shown: Black Ink Heather
JERZEESStyle 701MR · Sweatshirts
Unisex Eco™ Premium Blend Ring-Spun Crewneck Sweatshirt
A blank crewneck sweatshirt from the JERZEES line, offered in 4 colors in size M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 57/43 cvc combed ring-spun cotton/recycled polyester at 8.4 oz/yd²
- Recycled content
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black Ink Heather
Black Ink Heather
Frost Grey Heather
J. Navy
White
Available sizes
Availability — Black Ink Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Inventory Unavailable | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 57/43 cvc combed ring-spun cotton/recycled polyester
- Fabric weight
- 8.4 oz/yd²
- Fabric type
- fleece
- Yarn
- combed · ring-spun
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- M
- Colors
- 4
- Country of origin
- Honduras, El Salvador
- Sustainability
- Recycled content; US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes M.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Body Length | 27 | 28 | 29 | 30 | |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | |
| Sleeve Length (From Center Back) | 34 | 35 | 36 | 37 |
Fabric and construction
Manufacturer highlights
- 8.4 oz./yd², 57/43 CVC combed ring-spun cotton/recycled polyester
- Made with sustainably sourced USA grown cotton
- 100% recycled polyester yarn
- 3-end fleece
- Moisture-management properties
- 2x2 ribbed cuffs and waistband
- Tear away label
- Responsible Materials: contains recycled polyester and US grown cotton
Country of origin
Made in Honduras or El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8.3 vs 8.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.5 vs 8.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8.4 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8.4 oz)
- · Also Excellent for embroidery
Terms used on this page
- Combed Cotton
- Combed cotton is fiber mechanically combed after carding to remove short fibers and debris, producing a smoother, straighter strand for finer fabric.
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.