Shown: Ash
JERZEESStyle 4528MR · Sweatshirts
Unisex Super Sweats NuBlend® Quarter-Zip Cadet Collar Sweatshirt
A blank crewneck sweatshirt from the JERZEES line, offered in 3 colors in size 3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester at 9.5 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Ash
Ash
Black Heather
Oxford
Available sizes
Availability — Ash
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| 3XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 9.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- 3XL
- Colors
- 3
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes 3XL.
Garment measurements in inches, laid flat.
| Measurement | S | 3XL |
|---|---|---|
| Body Length | 27 | 32 |
| Chest Width (Laid Flat) | 20 | 30 |
| Sleeve Length | 34 1/2 | 39 |
Fabric and construction
Manufacturer highlights
- 9.5 oz./yd², 50/50 cotton/polyester
- Oxford is 48/52 cotton/polyester
- Pre-shrunk
- NuBlend® pill-resistant fleece
- High-stitch density for a smooth printing canvas
- Self-fabric cadet collar
- Double-needle stitched neck, armholes and waistband
- 1x1 ribbed cuffs and waistband with spandex
- Seamless body with set-in sleeves and concealed seams on cuffs
- Brass colored zipper
- Quarter-turned
Country of origin
Made in Honduras or El Salvador.
Shown for the Ash colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (9 vs 9.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (9.3 vs 9.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (9.5 vs 9.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Also Excellent for embroidery
- · Covers XS–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Anti-Pill Fleece
- Anti-pill fleece is fleece treated or engineered to resist forming the small fiber balls that build up on regular fleece after repeated washing and wear.
- Canvas (Duck Cloth)
- Canvas (duck cloth) is a heavy plain-weave cotton or cotton-blend fabric, typically 7-12 oz, used for totes, aprons, and workwear beyond t-shirts.
- Cadet collar
- A cadet collar is a short, stand-up, zippered collar with no fold, most often found on quarter-zip pullovers and track-style jackets.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.