Shown: J. Navy
Men's SpotShield® 50/50 Polo with Pocket
A blank polo from the JERZEES line, offered in J. Navy and sizes S–5XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester jersey knit at 5.4 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— J. Navy
J. Navy
Available sizes
Availability — J. Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| 4XL | Low Stock | — | |
| 5XL | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester jersey knit
- Fabric weight
- 5.4 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–5XL
- Colors
- 1
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–5XL.
Garment measurements in inches, laid flat.
| Measurement | S | 3XL | 4XL | 5XL |
|---|---|---|---|---|
| Body Length | 29 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 19 | 29 | 31 | 33 |
| Sleeve Length (From Center Back) | 19 | 24 | 25 | 26 |
Fabric and construction
Manufacturer highlights
- 5.4 oz./yd², 50/50 cotton/polyester jersey knit
- Oxford is 47/53 cotton/polyester
- SpotShield fabric repels water and most oil-based spills
- Welt collar resists curling
- 1x1 ribbed cuffs
- Two-button placket with 1/2" reinforced box
- Pearlized buttons
- Hemmed sleeves
- 5-point left chest pocket
- Tagless label
Country of origin
Made in Honduras or El Salvador.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5 vs 5.4 oz)
- · Covers S–6XL
- · Similar fiber mix
- · Similar weight (5 vs 5.4 oz)
- · Covers XS–6XL
- · Similar fiber mix
- · Similar weight (5 vs 5.4 oz)
- · Covers XS–6XL
- · Similar fiber mix
- · Similar weight (5.3 vs 5.4 oz)
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Jersey Knit
- Jersey knit is a single-knit fabric construction, smooth on the face and textured on the back, used for nearly every t-shirt at 4.2 to 6.1 ounces per yard.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.