Shown: Aquatic Blue
Youth Dri-Power® 50/50 T-Shirt
A blank t-shirt from the JERZEES line, offered in 11 colors in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester at 5.4 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Aquatic Blue
Aquatic Blue
Deep Purple
Irish Green Heather
Island Yellow
Kiwi
Maroon
Neon Green
Neon Yellow
Safety Orange
Silver
Tennessee Orange
Available sizes
Availability — Aquatic Blue
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 5.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Youth
- Fit
- Not stated
- Sizes
- XL
- Colors
- 11
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for youth wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | M | XL |
|---|---|---|
| Body Length | 22 | 26 |
| Chest Width (Laid Flat) | 17 | 19 |
| Sleeve Length (From Center Back) | 15 | 17 |
Fabric and construction
Manufacturer highlights
- 5.4 oz./yd² (US), 9 oz/ L yd (CA), 50/50 cotton/polyester
- Oxford is 47/53 cotton/polyester
- Pre-shrunk
- Advanced moisture-management performance
- Noticeably softer hand & excellent printability
- 1x1 ribbed collar
- Double-needle stitched sleeves, bottom hem and front neck
- Shoulder-to-shoulder taping
- Quarter-turned to eliminate center crease
- CPSIA tracking label compliant
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the Aquatic Blue colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5 vs 5.4 oz)
- · Covers XS–XL
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.4 vs 5.4 oz)
- · Covers S–XL
- · Similar fiber mix
- · Similar weight (5.5 vs 5.4 oz)
- · Covers XS–XL
- · Similar fiber mix
- · Similar weight (5.7 vs 5.4 oz)
- · Covers XS–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Hand (Hand Feel)
- Hand, or hand feel, is shop shorthand for how a finished print or fabric feels to the touch, the quality behind every request for a softer print.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.