Shown: Black
Unisex Dri-Power® Performance T-Shirt
A blank t-shirt from the JERZEES line, offered in 10 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 5.3 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 10— Black
Black
California Blue
Charcoal Grey
J. Navy
Royal
Safety Green
Safety Orange
Silver
True Red
Light Blue
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | Available |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S
- Colors
- 10
- Country of origin
- Honduras, El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S | 2XL | 3XL |
|---|---|---|---|
| Body Length | 28 | 32 | 33 |
| Chest Width (Laid Flat) | 18 | 26 | 28 |
| Sleeve Length (From Center Back) | 16 3/4 | 21 1/4 | 22 3/4 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd², 100% polyester
- Cotton feel
- Ideal for sublimation printing
- Moisture-management and odor control properties
- 1x1 ribbed collar
- Double-needle stitched front neck, sleeves and bottom hem
- Shoulder-to-shoulder taping
- Quarter-turned
- Tear away label
Country of origin
Made in Honduras or El Salvador.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (5 vs 5.3 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (5.5 vs 5.3 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–3XL
- · Same fabric: 100% polyester
- · Also Excellent for sublimation
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Dye Sublimation
- Dye sublimation is a print process where heat turns solid dye into a gas that bonds permanently inside polyester fibers, becoming part of the fabric itself.
- Odor-Resistant
- Odor-resistant fabric carries an antimicrobial treatment — usually silver ion or a branded finish like Polygiene — that slows the bacteria causing sweat smell between washes.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.