Shown: Charcoal
J. AmericaStyle 8846 · Hoodies
Men's Sport Weave Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in Charcoal in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 80/20 cotton/polyester cross-weave fleece at 12 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Charcoal
Charcoal
Available sizes
Availability — Charcoal
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 cotton/polyester cross-weave fleece
- Fabric weight
- 12 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S
- Colors
- 1
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S |
|---|---|
| Body Length | 27 |
| Chest Width (Laid Flat) | 22 1/2 |
| Sleeve Length (From Center Back) | 37 |
Fabric and construction
Manufacturer highlights
- 12 oz./yd², 80/20 cotton/polyester cross-weave fleece
- Set-in sleeves
- Rib side gussets, cuffs and waistband
- Pouch pocket
Country of origin
Made in Pakistan.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (11.5 vs 12 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (11.5 vs 12 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (12.5 vs 12 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.