Shown: Burgundy Speck
J. AmericaStyle 8711 · Hoodies
Men's Aspen Fleece Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in 5 colors and sizes S–M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 88/12 cotton/ polyester brushed heathered fleece at 8 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Burgundy Speck
Burgundy Speck
Forest Speck
Charcoal Speck
Navy Speck
Rust Speck
Available sizes
Availability — Burgundy Speck
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 cotton/ polyester brushed heathered fleece
- Fabric weight
- 8 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–M
- Colors
- 5
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–M.
Fabric and construction
Manufacturer highlights
- 8 oz/sq 88/12 cotton/ polyester brushed heathered fleece
- Solid 1x1 rib around hood, cuffs and waistband
- Twill tape at back neck
- Faux suede accent throughout
- Pouch pocket
- Tear away label
Country of origin
Made in Pakistan.
Shown for the Burgundy Speck colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (8.26 vs 8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.4 vs 8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.4 vs 8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- 1x1 Rib
- 1x1 rib is a knit alternating single knit and purl columns one stitch wide, giving collars and cuffs the stretch and recovery to snap back after wear.
- Twill Tape
- Twill tape is a narrow, diagonally-woven cotton or poly-cotton ribbon used to reinforce neck seams, trim hoods, and add contrast accents on apparel.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.