J. America 8710 Unisex Flip Side Fleece Crewneck Sweatshirt in Chambray Heather — blank crewneck sweatshirt, front view

Shown: Chambray Heather

J. AmericaStyle 8710 · Sweatshirts

Unisex Flip Side Fleece Crewneck Sweatshirt

A blank crewneck sweatshirt from the J. America line, offered in 3 colors and sizes L–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.

  • Excellent for embroidery
  • 55/45 cotton/polyester inside out fleece at 7 oz/yd²
  • Tear-away label for rebranding
  • ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.

Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.

Colors 3— Chambray Heather

  • Chambray Heather

  • Charcoal Heather

  • Grey Heather

Available sizes

L3XL

Availability — Chambray Heather

Availability by size for the Chambray Heather colorway, as of the last catalog sync
SizeStatusLocal pickup (Chicagoland)Actions
LLimited—
3XLLimited—

Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.

Key specifications

Fabric composition
55/45 cotton/polyester inside out fleece
Fabric weight
7 oz/yd²
Fabric type
fleece
Yarn
Not stated
Construction
Side-seamed
Label
Tear-away label
Cut for
Unisex
Fit
Not stated
Sizes
L–3XL
Colors
3
Country of origin
Pakistan
Sustainability
Not stated

Decoration compatibility

VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.

Blended fabric prints reliably; match the ink system to the dominant fiber.

  • Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
  • Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.

Compatible with this fabric type at correct press temperature and pressure.

  • Lofted fleece surface — press with slightly higher pressure for full transfer contact.

Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.

  • Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
  • Non-flat fleece surface reduces DTG detail.

Embroidery

Excellent

Midweight-plus fabric supports dense stitch counts without distortion.

  • Lofted fleece — a water-soluble topping keeps small lettering from sinking.

Standard HTV and transfers apply well at the correct temperature for this fiber mix.

Sublimation

Not Recommended

Cotton-dominant fabric does not bond sublimation dye.

Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.

Fit and sizing

Fit category not stated, cut for unisex wear · sizes L–3XL.

Garment measurements in inches, laid flat.

MeasurementXSSMLXL2XL3XL
Body Length24 1/425 1/226 3/42829 1/430 1/231 1/2
Chest Width (Laid Flat)18 1/419 1/220 3/42223 1/424 1/225 1/2
Sleeve Length32 3/43435 1/436 1/237 3/43940

Fabric and construction

Manufacturer highlights

Country of origin

Made in Pakistan.

Shown for the Chambray Heather colorway; origin can vary by color and production run.

Recommended applications

The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.

Similar alternatives

  • · Similar fiber mix
  • · Similar weight (7.5 vs 7 oz)
  • · Also Excellent for embroidery
  • · Similar fiber mix
  • · Similar weight (7.5 vs 7 oz)
  • · Also Excellent for embroidery
  • · Similar fiber mix
  • · Similar weight (7.5 vs 7 oz)
  • · Also Excellent for embroidery
  • · Similar fiber mix
  • · Similar weight (7.5 vs 7 oz)
  • · Also Excellent for embroidery

View all 189 sweatshirts →

Terms used on this page

Polyester
Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
Fleece
Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
Ringer collar
A ringer collar is the contrast-color ribbed trim around the neckline, and often cuffs, of a ringer tee, a retro style that adds a second color for free.
Twill Tape
Twill tape is a narrow, diagonally-woven cotton or poly-cotton ribbon used to reinforce neck seams, trim hoods, and add contrast accents on apparel.
Raglan Sleeve
A raglan sleeve is cut in one piece with the shoulder, creating a diagonal seam from underarm to collar instead of a rounded shoulder seam.
Tear-Away Label
A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
J. America 8710 Unisex Flip Side Fleece Crewneck Sweatshirt | VisePrint