Shown: Dynasty Green Stripe
J. AmericaStyle 8662 · Hoodies
Women's Odyssey Striped Performance Fleece Lapover Hooded Sweatshirt
A blank hooded sweatshirt from the J. America line, offered in 6 colors and sizes S–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 7.5 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Dynasty Green Stripe
Dynasty Green Stripe
Granite
Navy
Passion Pink Stripe
Quarry
Sapphire
Available sizes
Availability — Dynasty Green Stripe
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 7.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–XL
- Colors
- 6
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 24 1/2 | 25 1/2 | 26 1/2 | 27 1/2 | 28 1/2 |
| Chest Width (Laid Flat) | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 | 24 1/2 |
Fabric and construction
Manufacturer highlights
- 7.5 oz./yd², 100% polyester fleece
- Set-in sleeves
- Scuba neckline with lapover hood construction
- Pouch pocket
- Thumbholes on cuffs
- Extended back hem
Country of origin
Made in China.
Shown for the Dynasty Green Stripe colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (7 vs 7.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7 vs 7.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.4 vs 7.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.