Shown: Cement
J. AmericaStyle 8115 · T-Shirts
Unisex Zen Jersey T-Shirt
A blank t-shirt from the J. America line, offered in 5 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester burnout jersey at 4 oz/yd²
- Tear-away label for rebranding
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Cement
Cement
Dark Smoke
Twisted Black
Twisted Royal
Vintage Navy
Available sizes
Availability — Cement
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester burnout jersey
- Fabric weight
- 4 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 5
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 |
| Chest Width (Laid Flat) | 19 | 20 1/2 | 22 | 23 1/2 | 25 | 26 1/2 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd², 50/50 cotton/polyester burnout jersey
- Acid-washed with silicone finish
- Self-fabric collar
- Flatlock-stitched throughout
- Tear away label
About this blank
J. America Zen Fabric is a specialty product that undergoes a variety of processes to create its unique and textured look. As a result, the finished garments will shed a portion of their darker fibers, becoming noticeably lighter in shade after the initial laundry cycles. For best results, please wash and dry separately, following label instructions, for the initial launderings. Significant lint build up in the dryer is normal in the initial laundry cycles and can be avoided by hanging to dry.
Country of origin
Made in Pakistan.
Shown for the Cement colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester burnout jersey
- · Similar weight (4 vs 4 oz)
- · Covers S–2XL
- · Similar fiber mix
- · Similar weight (4.2 vs 4 oz)
- · Covers S–2XL
- · Similar fiber mix
- · Similar weight (4.5 vs 4 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.1 vs 4 oz)
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Burnout Fabric
- Burnout fabric is a poly-cotton blend chemically treated to dissolve the cotton in a pattern, leaving a sheer, worn-in look prized for vintage tees.
- Silicone Finish
- A silicone finish is a softener applied during wet processing that bonds a lubricating layer to cotton fibers, giving premium tees their slick, buttery hand.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.