Shown: Black
Independent Trading Co.Style PRM90HT · Hoodies
Unisex Midweight French Terry Hooded Sweatshirt
A blank hooded sweatshirt from the Independent Trading Co. line, offered in 5 colors and sizes S–M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70/30 ring-spun cotton/polyester blend french terry at 7.5 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Burnt Orange Heather
Navy Heather
Oatmeal Heather
Salt & Pepperout of stock
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | Available | |
| M | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 ring-spun cotton/polyester blend french terry
- Fabric weight
- 7.5 oz/yd²
- Fabric type
- french terry
- Yarn
- ring-spun · 32 singles
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Athletic/Fitted
- Sizes
- S–M
- Colors
- 5
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Athletic/Fitted fit, cut for unisex wear · sizes S–M.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 22 1/2 | 24 | 25 1/2 | 28 1/2 | 29 1/2 | 30 1/2 |
| Chest Width (Laid Flat) | 18 | 19 | 20 | 22 | 23 | 24 |
| Sleeve Length (From Center Back) | 23 1/2 | 24 1/2 | 25 1/2 | 26 1/2 | 27 1/4 | 28 |
Fabric and construction
Manufacturer highlights
- 7.5 oz./yd², 70/30 ring-spun cotton/polyester blend French terry, 32 singles
- Black & Charcoal Heather are 55/45 cotton/polyester blend French terry
- Pre-laundered
- Unisex, slim fit
- Unlined hood
- Split stitch double-needle sewing
- 1x1 ribbing at cuffs, waistband, and side panels
- Antique nickel eyelets
- Two antique nickel tipped flat drawcords (natural contrast + one dyed-to-match)
- Natural-colored exposed zipper tape
- Media pocket and eyelet in front pocket
- Thumbhole on cuffs
- Twill neck tape
- V-notch
- Tear away label
About this blank
Please note: This style is not made of 100% cotton face yarn. Please do your own testing prior to screenprinting. This is not a discharge friendly fabric.
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 70/30 ring-spun cotton/polyester blend french terry
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 7.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Slim Fit
- Slim fit is a tapered T-shirt cut with a trimmer chest, narrower sleeve openings, and a contoured waist that sits close to the body instead of hanging straight.