Shown: Army
Independent Trading Co.Style IND3000 · Sweatshirts
Unisex Heavyweight Crewneck Sweatshirt
A blank crewneck sweatshirt from the Independent Trading Co. line, offered in 17 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70/30 ring-spun cotton/polyester at 10 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 17— Army
Army
Ash Heather
Asphalt
Black
Bone
Brown
Cement
Deadwood Tree Camo
Dusty Sage
Grey Heather
Navy
Plum
Red
Royal
Sandstone
Storm Blue
White
Available sizes
Availability — Army
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | — | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 ring-spun cotton/polyester
- Fabric weight
- 10 oz/yd²
- Fabric type
- fleece
- Yarn
- ring-spun · 32 singles
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 17
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Width (Laid Flat) | 20 1/2 | 21 | 23 | 24 1/2 | 26 1/2 | 27 1/2 | 28 1/2 |
| Sleeve Length (From Center Back) | 34 1/2 | 35 1/2 | 36 1/2 | 37 1/2 | 38 1/2 | 39 1/2 | 40 1/2 |
Fabric and construction
Manufacturer highlights
- 10 oz./yd² (330gm) 70/30 ring-spun cotton/polyester 3-end fleece with 100% cotton face yarns on solid colors, 32 singles
- Deadwood Tree Camo is 70/30 cotton/polyester
- Ash & Grey Heather are 52/48 ring-spun cotton/polyester
- Generous fit
- Split stitch double-needle sewing on all seams
- Twill neck tape
- 1x1 ribbing at cuff and waistband
- Tear away label
About this blank
Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.
Country of origin
Made in China.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (10.5 vs 10 oz)
- · Also Excellent for embroidery
Terms used on this page
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Twill
- Twill is a woven fabric with a diagonal rib pattern, prized for durability and used as the standard ground fabric for caps and embroidery.