Shown: Birch
HollowayStyle 222798 · Hoodies
Women's Eco Revive™ Ventura Soft Knit Hooded Sweatshirt
A blank hooded sweatshirt from the Holloway line, offered in 14 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 89/11 recycled polyester/spandex at 6.3 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 14— Birch
Birch
Black
Carbon Heather
Dark Green
Grey Heather
Lavender
Maroon
Navy
Olive
Orchid
Royal
Scarlet
Storm
Terracotta
Available sizes
Availability — Birch
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| S | Inventory Unavailable | — | |
| M | Inventory Unavailable | — | |
| L | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 89/11 recycled polyester/spandex
- Fabric weight
- 6.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tagless
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–2XL
- Colors
- 14
- Country of origin
- Egypt
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length Front | 25 | 25 3/4 | 26 1/2 | 27 1/4 | 28 | 28 3/4 |
| Chest Circumference | 35 1/2 | 37 1/2 | 39 1/2 | 42 1/2 | 44 1/2 | 47 1/2 |
| Sleeve Length | 30 1/2 | 31 1/4 | 32 | 32 3/4 | 33 1/2 | 34 1/4 |
Fabric and construction
Manufacturer highlights
- 6.3 oz./yd², 89/11 recycled polyester/spandex
- Moisture-management properties
- 3-panel crossover hood
- Side seam pockets
- Set-in sleeves
- Self-fabric cuffs
- Thumbhole on cuffs
- Self-fabric bottom hem
- Side vents
- Tagless label
- Responsible Materials: contains 89% recycled polyester
Country of origin
Made in Egypt.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 89/11 recycled polyester/spandex
- · Similar weight (6.3 vs 6.3 oz)
- · Also Excellent for embroidery
- · Same fabric: 89/11 recycled polyester/spandex
- · Similar weight (6.3 vs 6.3 oz)
- · Also Excellent for embroidery
- · Similar weight (6.5 vs 6.3 oz)
- · Also Excellent for embroidery
- · Covers S–2XL
- · Similar weight (6.2 vs 6.3 oz)
- · Also Excellent for embroidery
- · Covers XXS–2XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Scuba hood
- A scuba hood is a snug, unlined hood with an overlapping crossover front, cut from bonded scuba knit instead of a drawstring hood.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.