Shown: Athletic Grey/ Black
Women's CoolCore® Polo
A blank polo from the Holloway line, offered in 13 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 88/12 polyester/elastane coolcore® fabric with
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 13— Athletic Grey/ Black
Athletic Grey/ Black
Black/ White
Columbia Blue/ White
Dark Green/ White
Iron/ White
Kelly/ White
Maroon/ White
Navy/ White
Orange/ White
Purple/ White
Royal/ White
Scarlet/ White
White/ Black
Available sizes
Availability — Athletic Grey/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | Inventory Unavailable | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Limited | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 polyester/elastane coolcore® fabric with
- Fabric weight
- Not stated
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 13
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 26 1/2 | 26 3/4 | 27 1/2 | 28 1/4 | 29 | 29 3/4 | 30 1/2 |
| Chest Circumference | 34 | 36 | 38 | 42 | 46 | 50 | 54 |
Fabric and construction
Manufacturer highlights
- 88/12 polyester/elastane Coolcore® fabric with color secure® technology that helps prevent dye migration
- Moisture-wicking performance
- UPF 50+ protection
- Four-way stretch fabric for increased mobility
- Johnny collar
- Set-in sleeves
- Side vents
- Tagless label
Country of origin
Made in China.
Shown for the White/ Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Dye Migration
- Dye migration is disperse dye from a polyester garment sublimating into wet ink during curing, turning white ink pink on a red shirt.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Johnny collar
- A johnny collar is a flat knit collar with an open V front and no buttons, offering a polo-style look for women's uniform tops without a placket.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.