Shown: Black
Unisex Tall ClimaBloc™ Lined Heavyweight Hooded Sweatshirt
A blank hooded sweatshirt from the Harriton line, offered in 4 colors and sizes LT–3XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70% cotton at 11 oz/yd²
- Fair Labor Association
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Dark Charcoal
Dark Navy
Safety Yellow
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | Limited | — | |
| XLT | Limited | — | |
| 2XLT | Limited | — | |
| 3XLT | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70% cotton
- Fabric weight
- 11 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- LT–3XLT
- Colors
- 4
- Country of origin
- Pakistan
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes LT–3XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT | 3XLT |
|---|---|---|---|---|
| Body Length | 32 | 33 | 33 1/2 | 34 1/2 |
| Chest Width (Laid Flat) | 25 1/2 | 27 | 28 1/2 | 30 |
| Sleeve Length | 37 1/2 | 38 1/2 | 39 | 40 |
Fabric and construction
Manufacturer highlights
- 11 oz./yd²/373 gsm (US), 18.4 oz./L yd (CA), 70% cotton, 30% polyester crossweave fleece
- Lining is 60/40 cotton/polyester thermal
- Lining is Grey Heather for all colors
- ClimaBloc provides durable water-repellent (DWR) protection for wet and rugged work condition
- Dyed-to-match cotton round drawcord at neck
- Dyed-to-match rib trim at cuffs and hem
- Two pouch pockets
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 70% cotton
- · Similar weight (11 vs 11 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (10.5 vs 11 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (11 vs 11 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (11 vs 11 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.