Shown: Blush
Women's Blend-Tek™ Polo
A blank polo from the Harriton line, offered in Blush and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 65/35 polyester/soft hand cotton double at 5 oz/yd²
- Fair Labor Association
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Blush
Blush
Available sizes
Availability — Blush
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | In Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/soft hand cotton double
- Fabric weight
- 5 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 1
- Country of origin
- Egypt
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 23 3/4 | 24 3/4 | 25 3/4 | 27 | 28 1/2 |
| Chest Width (Laid Flat) | 18 3/4 | 19 3/4 | 21 1/4 | 23 1/2 | 26 1/2 |
| Sleeve Length | 14 1/4 | 14 3/4 | 15 3/8 | 16 1/8 | 17 |
Fabric and construction
Manufacturer highlights
- 5 oz./yd² (US), 8.4 oz./L yd (CA), 65/35 polyester/Soft hand cotton double piqué
- Moisture-wicking performance
- UPF 30+ protection
- Anti-microbial properties
- Soil and wrinkle-release exterior
- Low shrinkage
- Flat-knit collar and sleeve hems
- Set-in sleeves
- Three-button placket
- Double-needle stitched bottom hem
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Egypt.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5 vs 5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Soft Hand
- Soft hand describes how lightly a print sits on fabric, achieved with thin plastisol deposits, water-based ink, or discharge printing instead of a heavy film.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Shrinkage
- Shrinkage is how much a garment tightens after washing and drying — untreated cotton can lose up to 5% in length, preshrunk fabric less.
- Flat-knit collar
- A flat-knit collar is a separately knitted collar attached to a polo shirt as its own piece, giving a firmer stand-up shape than a cut-and-sewn collar.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.