Shown: Black
HanesStyle W120 · Long Sleeve Tees
Unisex Workwear Long Sleeve Pocket T-Shirt
A blank long sleeve tee from the Hanes line, offered in 5 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 60/30/10 recycled polyester/ring-spun cotton/rayon at 5.3 oz/yd²
- Recycled content
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Light Steel
Navy
Safety Green
Safety Orange
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/30/10 recycled polyester/ring-spun cotton/rayon
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- ring-spun
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 5
- Country of origin
- Dominican Republic
- Sustainability
- Recycled content; OEKO-TEX certified facility; Fair Labor Association; US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
| Sleeve Length (From Center Back) | 34 1/2 | 35 1/2 | 37 | 38 | 40 | 41 | 42 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd², 60/30/10 recycled polyester/ring-spun cotton/rayon
- Light Steel is 90/10 cotton/polyester
- Fresh IQ odor protection technology
- X-TEMP cooling and wicking
- Extra length for coverage
- Pencil stitched, reinforced pocket
- Safety Green is ANSI certified
- Tear away label
- Responsible Materials: contains US grown BCI cotton and recycled polyester
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Dominican Republic.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar fiber mix
- · Covers S–3XL
- · Similar weight (5.4 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (5.4 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (5.4 vs 5.3 oz)
- · Covers S–4XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Better Cotton (BCI)
- Better Cotton (BCI) is a global training and sourcing program that improves conventional cotton farming's water, pesticide, and labor practices without requiring organic certification.