Shown: Ash
HanesStyle F260 · Sweatshirts
Unisex Ultimate Cotton® Crewneck Sweatshirt
A blank crewneck sweatshirt from the Hanes line, offered in 19 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 90/10 us grown cotton/polyester at 10 oz/yd²
- OEKO-TEX certified facility
- Tear-away label for rebranding
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 19— Ash
Ash
Black
Cactus
Charcoal Heather
Deep Forest
Deep Red
Deep Royal
Light Steel
Maroon
Mauve
Natural
Navy
Oregano
Pale Pink
Pebble
Sand
Smoke Grey
Teal
White
Available sizes
Availability — Ash
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 90/10 us grown cotton/polyester
- Fabric weight
- 10 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 19
- Country of origin
- El Salvador, Honduras, Guatemala
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association; US-grown / BCI cotton
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
|---|---|---|---|---|---|---|---|---|
| Across Shoulders | 20 | 22 | 24 | 26 | 28 | 30 | ||
| Body Length | 28 | 29 | 30 | 31 | 32 | 33 | ||
| Chest Width (Laid Flat) | 21 | 23 | 25 | 27 | 29 | 31 | ||
| Sleeve Length (From Center Back) | 35 | 36 1/4 | 36 7/8 | 37 5/8 | 38 3/8 | 39 1/8 |
Fabric and construction
Manufacturer highlights
- 10 oz./yd², 90/10 US grown cotton/polyester
- Light Steel is 85/15 US grown cotton/polyester
- Charcoal Heather is 65/35 US grown cotton/polyester
- 100% cotton face
- Patented, low-pill, high-stitch density PrintPro®XP fleece
- Spandex blend ribbed collar, cuffs and waistband
- Coverstitched neckline and armholes
- Tear away label
- Responsible Materials: contains US grown BCI cotton
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in El Salvador, Honduras, or Guatemala.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (10 vs 10 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9.5 vs 10 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.