
Shown: Deep Blue
DRI DUCKStyle 4451 · Dress Shirts & Wovens
Men's Craftsman Woven Short Sleeve Shirt
A blank woven shirt from the DRI DUCK line, offered in 4 colors and sizes M–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 58/40/2 cotton/polyester/spandex ripstop at 4 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ DTF transfer and Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Deep Blue
Deep Blue
Gunmetal
Rope
Black
Available sizes
Availability — Deep Blue
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Limited | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 58/40/2 cotton/polyester/spandex ripstop
- Fabric weight
- 4 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- M–4XL
- Colors
- 4
- Country of origin
- Bangladesh
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes M–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 30 | 31 | 32 | 33 | 34 | 35 | 36 |
| Chest Circumference | 44 | 47 | 50 | 53 | 56 | 60 | 64 |
| Chest Pocket | Left: 5 3/4 | 5 3/4 | 6 | 6 | 6 1/4 | 6 1/4 | 6 1/2 |
| Pocket Size - Front | Right: 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 |
| Sleeve Length | 9 1/2 | 10 | 10 1/2 | 11 | 11 1/2 | 12 | 12 1/2 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd², 58/40/2 cotton/polyester/spandex ripstop
- Garment washed for comfort
- POWER MOVE™ vertical vented action back with Flex-Mesh™
- Four-way stretch fabric for increased mobility
- Triple-needle stitching to reinforce high stress areas
- Button-down collar
- Industrial strength buttons
- Double patch pockets with button closure and pencil stall
- Drop behind cell phone pocket
About this blank
DRI DUCK products purchased and re-sold BLANK (without added decoration) whether through an authorized or unauthorized retail store, website, or any third party site (ie., Amazon, Craigslist, eBay, WalMart, etc) must adhere to DRI DUCK’s MAP Pricing Policy Failure to comply will result in loss of privilege to sell the brand.
Country of origin
Made in Bangladesh.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Same fabric: 58/40/2 cotton/polyester/spandex ripstop
- · Similar weight (4.1 vs 4 oz)
- · Covers S–4XL
- · Same fabric: 58/40/2 cotton/polyester/spandex ripstop
- · Similar weight (4.1 vs 4 oz)
- · Similar fiber mix
- · Similar weight (4.4 vs 4 oz)
- · Covers S–5XL
- · Similar fiber mix
- · Similar weight (4.1 vs 4 oz)
- · Covers S–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Ripstop
- Ripstop is a woven fabric with reinforcing threads spaced in a grid pattern, typically every 1/4 to 3/8 inch, that stop small punctures from spreading into larger rips.
- Garment-Washed
- Garment-washed means the shirt was washed, and sometimes dyed, after it was fully sewn, arriving pre-softened, pre-shrunk, and slightly worn-in out of the bag.