Shown: White/ Graphite/ Light Grey
Devon & JonesStyle DG520 · Dress Shirts & Wovens
Men's Crown Collection® Glen Plaid Woven Dress Shirt
A blank woven shirt from the Devon & Jones line, offered in 2 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 55/45 cotton/polyester at 3.4 oz/yd²
- Fair Labor Association
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— White/ Graphite/ Light Grey
White/ Graphite/ Light Grey
White/ Light French Blue
Available sizes
Availability — White/ Graphite/ Light Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/45 cotton/polyester
- Fabric weight
- 3.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 2
- Country of origin
- Viet Nam
- Sustainability
- Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 29 1/8 | 30 5/8 | 32 1/8 | 34 1/8 | 35 1/8 | 36 1/8 | 37 1/8 |
| Chest Circumference | 35-38 | 39-41 | 42-45 | 46-49 | 50-52 | 53-56 | 57-60 |
| Chest Width (Laid Flat) | 21 | 22 1/2 | 24 | 25 1/2 | 27 | 28 1/2 | 30 |
| Neck Circumference | 17 1/4 | 17 1/2 | 18 | 18 1/2 | 19 3/8 | 20 1/2 | 21 1/2 |
| Neck Spec Size | 14 1/2-15 | 15 1/2-16 | 16 1/2-17 | 17 1/2-18 | 18 1/2-19 | 19 1/2-20 | 20 1/2-21 |
| Sleeve Length | 32 1/2 | 34 1/2 | 36 1/2 | 37 1/8 | 37 3/4 | 38 1/8 | 39 |
Fabric and construction
Manufacturer highlights
- 3.4 oz. (US), 5.7 oz/Lyd (CA), 55/45 cotton/polyester
- Fine yarn count shirting
- Active fit
- Fabric properties that prevent wrinkles for a crisp, polished look
- Stain release fabric properties allows stains to detach during washing
- Straight collar with built-in collar stays
- Adjustable Comfort Collar for up to an inch of stretch at neck
- Pearlized buttons
- Fused collar, cuffs, and placket
- Left-chest pocket
- Patented pucker-free taped seams
- Split back seam with bias cut back yoke
- Responsible Supplier: this product was made in a facility that is FLA certified
Country of origin
Made in Viet Nam.
Shown for the White/ Graphite/ Light Grey colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Same fabric: 55/45 cotton/polyester
- · Similar weight (3.4 vs 3.4 oz)
- · Covers S–4XL
- · Same fabric: 55/45 cotton/polyester
- · Similar weight (3.4 vs 3.4 oz)
- · Covers S–4XL
- · Same fabric: 55/45 cotton/polyester
- · Similar weight (3.4 vs 3.4 oz)
- · Covers S–3XL
- · Same fabric: 55/45 cotton/polyester
- · Similar weight (3.4 vs 3.4 oz)
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Yarn count
- Yarn count measures how fine or coarse a spun yarn is, with a higher singles number meaning thinner yarn and, usually, a softer, more detailed print surface.
- Stain Release
- Stain release is a fabric finish that makes synthetic fibers hydrophilic so oily and food-based stains lift out in the wash instead of bonding to them.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.