Shown: Black
ColumbiaStyle 212469 · More Styles
Men's Klamath Range™ II Half-Zip Pullover
A blank garment from the Columbia line, offered in 3 colors and sizes S–3X. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black
Black
City Grey/ Shark
Collegiate Navy
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| XXL | In Stock | — | |
| 3X | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- Not stated
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Classic
- Sizes
- S–3X
- Colors
- 3
- Country of origin
- Bangladesh
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Classic fit, cut for men's wear · sizes S–3X.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | XXL | 3X |
|---|---|---|---|---|---|---|
| Body Length | 28 | 29 | 30 | 31 | 31 1/2 | 32 1/2 |
| Chest Circumference | 42 | 45 | 48 | 51 | 54 | 59 |
| Sleeve Length (From Center Back) | 34 | 35 | 36 | 37 | 37 1/2 | 38 1/4 |
Fabric and construction
Manufacturer highlights
- 100% polyester, lightweight microfleece
- Comfort stretch
- Regular fit
- Embroidered Columbia logo on left sleeve
- Woven label
- Please note Columbia products cannot be exported internationally
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, and RCS certified.
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Bangladesh.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% polyester
- · Classic fit
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Classic fit
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Classic fit
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Classic fit
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Microfleece
- Microfleece is a thin, lightweight polyester fleece with a short, dense pile, used in quarter-zips and mid-layers where bulk needs to stay low.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.
- Woven Label
- A woven label is a fabric tag with a logo or brand name woven into the threads on a loom, then sewn into a garment's neck or hem.
- Recycled Claim Standard (RCS)
- The Recycled Claim Standard (RCS) is a certification verifying the percentage of recycled material in a product without added environmental or social criteria.