Shown: Black
Men's Tech Trail™ Utility Polo
A blank polo from the Columbia line, offered in 4 colors and sizes S–4X. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 93/7 polyester/elastane
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Columbia Grey
Ripple Blue
Stone Green
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| XXL | In Stock | — | |
| 3X | In Stock | — | |
| 4X | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 93/7 polyester/elastane
- Fabric weight
- Not stated
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–4X
- Colors
- 4
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–4X.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | XXL | 3X | 4X |
|---|---|---|---|---|---|---|---|
| Across Shoulders | 16 1/2 | 17 1/2 | 18 1/2 | 19 3/4 | 21 | 22 1/2 | 23 1/2 |
| Body Length Back | 28 1/2 | 29 | 29 1/2 | 30 | 30 1/2 | 32 | 32 1/2 |
| Chest Circumference | 40 | 43 | 46 | 50 | 54 | 58 | 62 |
Fabric and construction
Manufacturer highlights
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, and RCS certified.
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Viet Nam.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Recycled Claim Standard (RCS)
- The Recycled Claim Standard (RCS) is a certification verifying the percentage of recycled material in a product without added environmental or social criteria.