Shown: White/ Black
ColumbiaStyle 209647 · Jackets & Vests
Men's Arctic Crest™ Sherpa Full-Zip Jacket
A blank jacket from the Columbia line, offered in White/ Black in size XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Only 0 of 1 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— White/ Black
White/ Blackout of stock
Available sizes
Availability — White/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- Not stated
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XL
- Colors
- 1
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XL.
Garment measurements in inches, laid flat.
| Measurement | XL |
|---|---|
| Body Length | 29 1/2 |
| Chest Circumference | 50 1/2 |
| Sleeve Length (From Center Back) | 37 1/2 |
Fabric and construction
Manufacturer highlights
- 100% polyester
- Panels are 86/14 nylon/elastane
- Omni-Heat™ Arctic uses solar-capture insulation system
- Active fit
- Plush fleece-lined hood and collar
- Drawcord-adjustable hem
- Elastic cuffs adjust
- Chin guard prevents chafing
- Stretch binding on hood brim
- Abrasion-resistant overlays
- Zippered chest and hand pockets
- Columbia Titanium logo on left chest
- Omni-Heat™ Arctic branding on the left sleeve hem
- Woven label
- Please note Columbia products cannot be exported internationally
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, and RCS certified.
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Viet Nam.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers L–XL
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers S–4X
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers S–4X
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Nylon
- Nylon is a synthetic fiber known for strength and a slick, low-friction surface, common in jackets and bags, that requires specialized inks or transfers to hold a print.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Zipper garage (chin guard)
- A zipper garage, or chin guard, is a small fabric flap at the top of a zipper that shields the chin from the metal slider.
- Hand (Hand Feel)
- Hand, or hand feel, is shop shorthand for how a finished print or fabric feels to the touch, the quality behind every request for a softer print.