Shown: Charcoal Heather
ColumbiaStyle 147667 · Jackets & Vests
Men's Steens Mountain™ Fleece 2.0 Full-Zip Jacket
A blank jacket from the Columbia line, offered in Charcoal Heather in size L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% polyester at 7.4 oz/yd²
- Sustainability program stated by manufacturer
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Charcoal Heather
Charcoal Heather
Available sizes
Availability — Charcoal Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| L | Low Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 7.4 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- L
- Colors
- 1
- Country of origin
- Bangladesh, Indonesia
- Sustainability
- Sustainability program stated by manufacturer
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes L.
Garment measurements in inches, laid flat.
| Measurement | L |
|---|---|
| Body Length Back | 29 |
| Chest Circumference | 50 |
| Sleeve Length (From Center Back) | 37 |
Fabric and construction
Manufacturer highlights
- 7.4 oz./yd² (US) 12.3 oz./L yd (CA), 100% polyester MTR filament fleece
- Zippered hand pockets
- Columbia patch logo
- This product meets the following Sustainable Style subcategory:
- Solid Black colorway is not the exact shade as the Black in the Black/Grill colorway
- Please note Columbia products cannot be exported internationally
About this blank
Socially Conscious Manufacturing: This product was made in a facility that utilizes the Higg Index and has implemented Level 2 practices or above.
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Bangladesh or Indonesia.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (7.5 vs 7.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Similar weight (7.2 vs 7.4 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers XS–5XL
- · Same fabric: 100% polyester
- · Also Excellent for embroidery
- · Covers L–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Hand (Hand Feel)
- Hand, or hand feel, is shop shorthand for how a finished print or fabric feels to the touch, the quality behind every request for a softer print.
- Higg Index
- The Higg Index is a set of sustainability-scoring tools, built by the Sustainable Apparel Coalition, that mills and brands use to measure a material's or facility's environmental impact.