Shown: Carbon Heather
ColumbiaStyle 141162 · Sweatshirts
Men's Hart Mountain™ Half-Zip Sweatshirt
A blank crewneck sweatshirt from the Columbia line, offered in Carbon Heather in size M. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 cotton/polyester sueded fleece
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Carbon Heather
Carbon Heather
Available sizes
Availability — Carbon Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Low Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester sueded fleece
- Fabric weight
- Not stated
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- M
- Colors
- 1
- Country of origin
- Sri Lanka, India, Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes M.
Garment measurements in inches, laid flat.
| Measurement | M |
|---|---|
| Body Length Back | 28 1/2 |
| Chest Circumference | 45 |
| Sleeve Length (From Center Back) | 35 1/2 |
Fabric and construction
Manufacturer highlights
- 60/40 cotton/polyester sueded fleece
- Body contouring fit
- Chest seam
- Ribbed cuffs and waistband
- Embroidered Columbia logo
- Please note Columbia products cannot be exported internationally
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, and RCS certified.
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Sri Lanka, India, or Viet Nam.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 60/40 cotton/polyester sueded fleece
- · Also Excellent for embroidery
- · Same fabric: 60/40 cotton/polyester sueded fleece
- · Also Excellent for embroidery
- · Covers XS–3XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers XS–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Recycled Claim Standard (RCS)
- The Recycled Claim Standard (RCS) is a certification verifying the percentage of recycled material in a product without added environmental or social criteria.