Shown: Sail
ColumbiaStyle 128705 · More Styles
Men's PFG Tamiami™ II Short Sleeve Shirt
A blank garment from the Columbia line, offered in 2 colors in size 3X. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 2.4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Sail
Sail
White
Available sizes
Availability — Sail
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| 3X | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 2.4 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- 3X
- Colors
- 2
- Country of origin
- Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes 3X.
Garment measurements in inches, laid flat.
| Measurement | L | 3X |
|---|---|---|
| Body Length Back | 31 1/2 | 33 1/2 |
| Chest Circumference | 50 | 60 |
| Sleeve Length (From Center Back) | 21 1/2 | 23 1/2 |
Fabric and construction
Manufacturer highlights
- 2.4 oz./yd², 100% polyester ripstop
- Omni-Wick™ moisture-management properties
- Omni-Shade™ UPF 40 protection
- Mesh-lined vent at center back
- Chest pockets with snap closure
- Hook-and-loop rod holder with Columbia patch logo on left chest
- Please note Columbia products cannot be exported internationally
About this blank
Columbia products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Viet Nam.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (2.4 vs 2.4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (2.2 vs 2.4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (2.9 vs 2.4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (2.4 vs 2.4 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Ripstop
- Ripstop is a woven fabric with reinforcing threads spaced in a grid pattern, typically every 1/4 to 3/8 inch, that stop small punctures from spreading into larger rips.