Shown: Black
Chef DesignsStyle TT32 · More Styles
Short Premium Bib Apron
A blank garment from the Chef Designs line, offered in 2 colors in size One Size. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 65/35 polyester/cotton at 7.5 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Black
Black
Navy
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| One Size | In Stock | — |
Last inventory sync: July 28, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/cotton
- Fabric weight
- 7.5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Not stated
- Fit
- Not stated
- Sizes
- One Size
- Colors
- 2
- Country of origin
- Honduras
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated · sizes One Size.
Garment measurements in inches, laid flat.
| Measurement | One Size |
|---|---|
| Measurements | 28"W x 24"L |
Fabric and construction
Manufacturer highlights
- 7.5 oz./yd², 65/35 polyester/cotton
- Soil-release finish
- Adjustable neck strap with plastic buckle, side ties
- Three-section front pouch pocket
Country of origin
Made in Honduras.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Premium merchandise →
Retail-tier cut and hand.
Similar alternatives
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7.5 vs 7.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers One Size
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Kangaroo Pocket
- A kangaroo pocket is the single front pouch stitched onto a pullover hoodie, and its top edge sets the lower limit for any front print or design.