Shown: Granite
BoxercraftStyle T31 · Long Sleeve Tees
Women's Cold Shoulder Long Sleeve T-Shirt
A blank long sleeve tee from the Boxercraft line, offered in 3 colors and sizes XS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 80/20 polyester/cotton sueded jersey at 4.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Granite
Granite
Navy
White
Available sizes
Availability — Granite
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — | |
| S | Limited | — | |
| M | Low Stock | — | |
| L | Inventory Unavailable | — | |
| XL | Inventory Unavailable | — | |
| 2XL | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 polyester/cotton sueded jersey
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–2XL
- Colors
- 3
- Country of origin
- Guatemala
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 24 1/2 | 26 | 27 | 28 | 29 | 30 |
| Chest Width (Laid Flat) | 17 | 18 1/2 | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 |
| Sleeve Length | 20 1/2 | 21 | 21 1/2 | 22 | 22 1/2 | 23 |
Fabric and construction
Manufacturer highlights
- 4.3 oz./yd², 80/20 polyester/cotton sueded jersey
- Cold shoulder detailing
- Contoured waistline for feminine fit
- Shirttail hem
- Heat transfer label
About this blank
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in Guatemala.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar weight (4.4 vs 4.3 oz)
- · Covers XS–2XL
- · Similar weight (3.8 vs 4.3 oz)
- · Covers XXS–2XL
- · Similar weight (4.2 vs 4.3 oz)
- · Covers XS–2XL
- · Similar weight (4 vs 4.3 oz)
- · Covers XS–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Curved Hem (Shirttail Hem)
- A curved hem, or shirttail hem, dips longer in back than in front, and that fit detail changes how low a front print should sit.
- Heat Transfer Label
- A heat transfer label is a printed neck or care label pressed directly onto fabric with a heat press instead of sewn in as woven or satin tape.