Shown: Blush
BoxercraftStyle K01 · Sweatshirts
Women's Fleece Out Crewneck Pullover
A blank crewneck sweatshirt from the Boxercraft line, offered in 12 colors and sizes XXS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 60/40 cotton/polyester at 6.5 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 12— Blush
Blush
Charcoal
Mandarin
Natural
Navy
Navy Tie-Dye
Olive
Orchid
Purple
Red
Royal
Sage
Available sizes
Availability — Blush
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Limited | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester
- Fabric weight
- 6.5 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Oversized
- Sizes
- XXS–2XL
- Colors
- 12
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Oversized fit, cut for women's wear · sizes XXS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|---|
| Body Length | 21 1/2 | 23 | 24 | 25 | 26 | 27 | 28 |
| Chest Circumference | 17 1/2 | 19 | 20 1/2 | 21 1/2 | 22 1/2 | 23 1/2 | 25 |
| Sleeve Length | 29 3/4 | 30 3/4 | 31 3/4 | 32 3/4 | 33 3/4 | 34 3/4 | 35 3/4 |
Fabric and construction
Manufacturer highlights
- 6.5 oz./yd², 60/40 cotton/polyester, reverse fleece
- Snuggly soft
- Boxy fit
- Rib knit at crewneck, cuffs and bottom hem
- Bottom side vents
About this blank
The dye process used to produce the tie-dye pattern garment infuses each with unique character. Please allow for color variations in productions.
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in China.
Shown for the Blush colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Oversized fit
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Oversized fit
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Oversized fit
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Boxy Fit
- Boxy fit is a wide, square-cut T-shirt silhouette with almost no waist taper and a standard or cropped body length, common on heavyweight streetwear blanks.
- Crew neck
- A crew neck is a round, close-fitting neckline finished with a ribbed collar band, the default cut on most t-shirts, sweatshirts, and hoodies.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Tie-dye
- Tie-dye is a resist-dyeing technique where fabric is bound, twisted, or folded before dyeing so each finished garment carries a unique, one-of-a-kind color pattern.