Shown: Aluminum
BoxercraftStyle EW2180 · T-Shirts
Women’s Recrafted Recyled T-Shirt
A blank t-shirt from the Boxercraft line, offered in 6 colors and sizes XXS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 post-consumer cotton/post-consumer polyester at 4.4 oz/yd²
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Aluminum
Aluminum
Black Heather
Cobalt Blue
Navy
Red
White
Available sizes
Availability — Aluminum
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Limited | — | |
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 post-consumer cotton/post-consumer polyester
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Not stated
- Fit
- Not stated
- Sizes
- XXS–2XL
- Colors
- 6
- Country of origin
- El Salvador
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated · sizes XXS–2XL.
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd²., 50/50 post-consumer cotton/post-consumer polyester
- Ribbed neck trim
- Turned back sleeves and bottom hem
Country of origin
Made in El Salvador.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Similar fiber mix
- · Similar weight (4.13 vs 4.4 oz)
- · Covers XS–2XL
- · Similar fiber mix
- · Similar weight (4.28 vs 4.4 oz)
- · Covers XXS–3XL
- · Similar fiber mix
- · Similar weight (4.28 vs 4.4 oz)
- · Covers XXS–2XL
- · Similar fiber mix
- · Similar weight (4.28 vs 4.4 oz)
- · Covers XXS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.