Shown: Black
BoxercraftStyle BW5401 · More Styles
Women's Lace Up Pullover
A blank garment from the Boxercraft line, offered in 7 colors and sizes XXS–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 70/30 cotton/polyester at 8.3 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 7— Black
Black
Espresso
Natural
Navy
Oxford Heather
Pacific Blue
Paradise
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Low Stock | — | |
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 cotton/polyester
- Fabric weight
- 8.3 oz/yd²
- Fabric type
- french terry
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Relaxed
- Sizes
- XXS–2XL
- Colors
- 7
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured french terry surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat french terry surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for women's wear · sizes XXS–2XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|---|
| Body Length | 21 1/2 | 23 | 24 | 25 | 26 | 27 | 28 |
| Chest Width (Laid Flat) | 17 1/2 | 19 | 20 1/2 | 21 1/2 | 22 1/2 | 23 1/2 | 25 |
| Sleeve Length | 21 1/2 | 22 | 22 1/2 | 23 | 23 1/2 | 24 | 24 1/2 |
Fabric and construction
Manufacturer highlights
- 8.3 oz./yd², 70/30 cotton/polyester, French Terry
- Loose fit
- Rib bottom band and sleeve cuffs
- Mock neck
- Dropped shoulder
- Gold tipped drawcords and gold eyelets
- Woven label
About this blank
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 70/30 cotton/polyester
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Same fabric: 70/30 cotton/polyester
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8.3 vs 8.3 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- French Terry
- French terry is a midweight knit with uncut interior loops instead of a brushed nap, used for lightweight sweatshirts, joggers, and crewnecks.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Mock neck
- A mock neck is a short, snug stand-up collar, usually 1 to 2 inches tall, that mimics a turtleneck's silhouette without folding over.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Woven Label
- A woven label is a fabric tag with a logo or brand name woven into the threads on a loom, then sewn into a garment's neck or hem.