
Shown: Oxford Heather
BoxercraftStyle BU5301 · Hoodies
Unisex Flannel Hooded Pullover
A blank hooded sweatshirt from the Boxercraft line, offered in 3 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 100% cotton at 4.3 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Oxford Heather
Oxford Heather
Red/ Black Buffalo
Black Jordan Plaid
Available sizes
Availability — Oxford Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Limited | — | |
| XL | Limited | — | |
| 2XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% cotton
- Fabric weight
- 4.3 oz/yd²
- Fabric type
- twill
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 3
- Country of origin
- Guatemala
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat twill surface reduces DTG detail.
Embroidery
Excellent
Structured twill holds stitches cleanly — the classic embroidery surface.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL |
|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 22 1/2 | 23 1/2 | 24 1/2 | 25 1/2 | 26 1/2 |
| Sleeve Length | 22 | 22 1/4 | 22 1/2 | 22 3/4 | 23 |
Fabric and construction
Manufacturer highlights
- 4.3 oz./yd², 100% cotton flannel
- Two-ply hood with twill drawcord
- Rib cuffs
- Rounded, shaped bottom opening
Country of origin
Made in Guatemala.
Shown for the Black Jordan Plaid colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 100% cotton
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.3 vs 4.3 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.5 vs 4.3 oz)
- · Covers XS–3XL
- · Similar fiber mix
- · Similar weight (4.5 vs 4.3 oz)
- · Covers XS–3XL
Terms used on this page
- Flannel
- Flannel is a brushed woven cotton fabric with a soft raised nap on one or both sides that traps warmth and softens printed detail.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Twill
- Twill is a woven fabric with a diagonal rib pattern, prized for durability and used as the standard ground fabric for caps and embroidery.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.