Shown: White
BoxercraftStyle BU3102 · Long Sleeve Tees
Unisex Essential Long Sleeve T-Shirt
A blank long sleeve tee from the Boxercraft line, offered in 4 colors and sizes XXS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 50/50 cotton/polyester at 6 oz/yd²
- 8-size run (XXS–3XL)
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— White
White
Charcoal Heather
Navy
Oxford Heather
Available sizes
Availability — White
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Low Stock | — | |
| XS | Low Stock | — | |
| S | Limited | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 6 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XXS–3XL
- Colors
- 4
- Country of origin
- Guatemala
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XXS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 | 23 1/2 | 24 1/2 | 25 1/2 | 26 1/2 |
| Sleeve Length | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
Fabric and construction
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.5 vs 6 oz)
- · Also Excellent for embroidery
- · Same fabric: 50/50 cotton/polyester
- · Same fabric: 50/50 cotton/polyester
- · Same fabric: 50/50 cotton/polyester
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- 1x1 Rib
- 1x1 rib is a knit alternating single knit and purl columns one stitch wide, giving collars and cuffs the stretch and recovery to snap back after wear.