Shown: Charcoal Heather
BoxercraftStyle BM5303 · Hoodies
Men's French Terry Hooded Sweatshirt
A blank hooded sweatshirt from the Boxercraft line, offered in 4 colors and sizes XXS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and embroidery
- 70/30 cotton/polyester at 8.3 oz/yd²
- 8-size run (XXS–3XL)
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Charcoal Heather
Charcoal Heather
Natural
Navy Heather
Oxford Heather
Available sizes
Availability — Charcoal Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XXS | Low Stock | — | |
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | Limited | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 cotton/polyester
- Fabric weight
- 8.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XXS–3XL
- Colors
- 4
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XXS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XXS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 23 1/2 | 25 1/2 | 26 1/2 | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | |
| Chest Width (Laid Flat) | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| Sleeve Length | 24 1/2 | 25 | 25 1/2 | 26 | 26 1/2 | 27 | 27 1/2 | 28 |
Fabric and construction
Manufacturer highlights
- 8.3 oz./yd², 70/30 cotton/polyester
- Self-fabric hood
- V-notch and drawcords
- 2x2 rib cuffs and bottom band
- BXC woven logo label at wearer’s left side seam
- Woven label
About this blank
Boxercraft products purchased from us must be sold with embellishment, Re-selling from an unauthorized retail store, website, or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc.) is strictly prohibited and must adhere to Boxercraft’s M.A.P (Minimum Advertised Pricing) policy. Failure to comply will result in loss of privilege to sell the Boxercraft brand.
Country of origin
Made in China.
Shown for the Charcoal Heather colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 70/30 cotton/polyester
- · Similar weight (8.5 vs 8.3 oz)
- · Also Excellent for embroidery
- · Same fabric: 70/30 cotton/polyester
- · Similar weight (8.5 vs 8.3 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (8 vs 8.3 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (8 vs 8.3 oz)
- · Also Excellent for screen printing
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- V-notch (V-insert)
- A V-notch, or V-insert, is a small triangular rib patch set into the collar of a crewneck sweatshirt, a retro detail signaling a heavier, premium vintage-style blank.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.
- Woven Label
- A woven label is a fabric tag with a logo or brand name woven into the threads on a loom, then sewn into a garment's neck or hem.