Shown: Titanium
Berne ApparelStyle SH21 · Dress Shirts & Wovens
Men's Utility Lightweight Canvas Woven Dress Shirt
A blank woven shirt from the Berne Apparel line, offered in 2 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing
- 60/40 cotton/polyester duck at 4 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Titanium
Titanium
Desert
Available sizes
Availability — Titanium
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 cotton/polyester duck
- Fabric weight
- 4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S
- Colors
- 2
- Country of origin
- Bangladesh
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S |
|---|---|
| Body Length | 30 7/8 |
| Chest Width (Laid Flat) | 20 3/4 |
| Sleeve Length | 34 1/2 |
Fabric and construction
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Workwear-grade construction.
Similar alternatives
- · Similar fiber mix
- · Similar weight (4 vs 4 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (4 vs 4 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (4.5 vs 4 oz)
- · Covers XS–4XL
- · Similar fiber mix
- · Similar weight (4 vs 4 oz)
- · Also Excellent for screen printing
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.