Shown: Hi Vis Yellow
Berne ApparelStyle HVK017 · T-Shirts
Men's Hi-Vis Class 2 Color Blocked Pocket T-Shirt
A blank t-shirt from the Berne Apparel line, offered in Hi Vis Yellow and sizes M–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Hi Vis Yellow
Hi Vis Yellow
Available sizes
Availability — Hi Vis Yellow
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- M–4XL
- Colors
- 1
- Country of origin
- China
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes M–4XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|
| Body Length | 31 | 31 1/2 | 32 1/2 | 33 | 34 | 35 |
| Chest Width (Laid Flat) | 22 | 24 | 26 | 28 | 30 | 32 |
| Sleeve Length | 18 1/2 | 19 1/2 | 20 1/2 | 21 1/2 | 22 1/2 | 23 1/2 |
Fabric and construction
Manufacturer highlights
- 4 oz./yd², 100% polyester birdseye mesh
- Moisture-management
- 2" reflective segmented tape
- Taped neck seam for extra comfort
- Left-chest pocket
- ANSI Class 2 Certified
Country of origin
Made in China.
Recommended applications
- Contractor apparel →
Workwear-grade construction.
- Events →
Event-crew staple with quick decoration turnaround.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.8 vs 4 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (3.5 vs 4 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.