Shown: Navy
Berne ApparelStyle FRSZ19T · Hoodies
Men's Tall Flame-Resistant Hooded Sweatshirt
A blank hooded sweatshirt from the Berne Apparel line, offered in Navy and sizes LT–2XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 100% cotton at 12 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Navy
Navy
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | In Stock | — | |
| XLT | In Stock | — | |
| 2XLT | Limited | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% cotton
- Fabric weight
- 12 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Relaxed
- Sizes
- LT–2XLT
- Colors
- 1
- Country of origin
- Bangladesh
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for men's wear · sizes LT–2XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT |
|---|---|---|---|
| Body Length | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 26 1/2 | 28 1/2 | 30 1/2 |
| Neck Size | 24 | 25 | 26 |
| Sleeve Length | 39 1/2 | 40 3/10 | 41 |
Fabric and construction
Manufacturer highlights
- 12 oz./yd², 100% cotton flame resistant fleece
- Flame resistant brass front zipper
- Flame resistant rib knit cuffs
- Flame resistant brass front zipper
- Two-needle stitched main seams
- Two front patch pockets
- Relaxed fit
- Meets the requirements of ASTM F1506, NFPA 70E, NFPA2112, and OSHA 1910.269
About this blank
WARNING:This Product can expose you To chemicals including Formaldehyde which Is/are known To the State Of California To cause cancer And/Or birth defects And other reproductive harm. For more information, go towww.P65Warnings.ca.gov
Country of origin
Made in Bangladesh.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 100% cotton
- · Similar weight (12 vs 12 oz)
- · Relaxed fit
- · Same fabric: 100% cotton
- · Similar weight (11.8 vs 12 oz)
- · Relaxed fit
- · Same fabric: 100% cotton
- · Similar weight (12 vs 12 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% cotton
- · Similar weight (12 vs 12 oz)
- · Also Excellent for embroidery
Terms used on this page
- Flame-Resistant (FR) Finish
- A flame-resistant finish is a treatment or fiber blend that makes fabric self-extinguish rather than continue burning, required on many industrial workwear contracts.
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Rib Knit
- Rib knit is a knit fabric of alternating vertical ridges that stretches and recovers far more than jersey, used for collars, cuffs, and waistbands.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.