Shown: Heather Grey
Berne ApparelStyle BSM40T · Long Sleeve Tees
Men's Tall Performance Long Sleeve Pocket T-Shirt
A blank long sleeve tee from the Berne Apparel line, offered in Heather Grey and sizes LT–2XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- ⚠ Embroidery: conditional — test first.
- ⚠ Fiber content not stated by the manufacturer.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Heather Grey
Heather Grey
Available sizes
Availability — Heather Grey
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | Low Stock | — | |
| 2XLT | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- Not stated
- Fabric weight
- 4.2 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- LT–2XLT
- Colors
- 1
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Unknown
Fiber content is not stated in the product data, so we can’t rate ink behavior confidently.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Unknown
DTG depends heavily on fiber content, which is not stated for this garment.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Unknown
Sublimation requires high polyester content, which is not stated for this garment.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes LT–2XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT | 3XLT | 4XLT |
|---|---|---|---|---|---|
| Body Length | 32 | 33 | 34 | 35 | 36 |
| Chest Width (Laid Flat) | 20 | 22 | 24 | 26 | 28 1/4 |
| Sleeve Length | 36 1/4 | 38 | 38 3/4 | 39 1/2 | 40 |
Fabric and construction
Manufacturer highlights
- 4.2 oz./yd², 88/12 cotton, polyester jersey
- Moisture-wicking performance
- Stain-release properties
- Performance fit
- Taped neck seam
- Tag less neck label
Country of origin
Made in Pakistan.
Recommended applications
- Contractor apparel →
Workwear-grade construction.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (4.2 vs 4.2 oz)
- · Workwear-tier peer
- · Similar weight (4.2 vs 4.2 oz)
- · Workwear-tier peer
- · Similar weight (4.2 vs 4.2 oz)
- · Workwear-tier peer
- · Similar weight (4.5 vs 4.2 oz)
- · Workwear-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Athletic Fit
- Athletic fit is a T-shirt pattern with a fuller chest and shoulder cut that tapers down to a narrower waist, built for muscular or broad-shouldered builds.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.