Shown: Blue Marble
BELLA + CANVASStyle 8850 · Long Sleeve Tees
Women’s Flowy Off Shoulder Long Sleeve Tee
A blank long sleeve tee from the BELLA + CANVAS line, offered in 2 colors in size XS. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 65/35 polyester/viscose at 3.7 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Blue Marble
Blue Marble
Red
Available sizes
Availability — Blue Marble
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/viscose
- Fabric weight
- 3.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- combed · ring-spun · Airlume · 32 singles
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Not stated
- Fit
- Not stated
- Sizes
- XS
- Colors
- 2
- Country of origin
- Honduras, Nicaragua
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated · sizes XS.
Garment measurements in inches, laid flat.
| Measurement | XS |
|---|---|
| Body Length Back | 20 3/4 |
| Body Length Front | 19 |
| Chest Width (Laid Flat) | 24 1/4 |
Fabric and construction
Manufacturer highlights
- 3.7 oz./yd² (US) 6.2 oz./L yd (CA), 65/35 polyester/viscose, 32 singles
- Athletic Heather is 52/48 polyester/viscose
- Marbles are 3.5 oz./yd², 91/9 polyester/Airlume combed and ring-spun cotton, 40 singles
- Neons are 3.7 oz./yd², 65/35 polyester/viscose, 32 singles
- Relaxed, drapey fit
- Rib cuffs and waistband
- Seam up center back
- Dolman sleeves
- Side seams
- Tear away label
- Responsible Supplier: this product was made in a facility that is Bluesign certified
Country of origin
Made in Honduras or Nicaragua.
Shown for the Blue Marble colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
Similar alternatives
- · Similar weight (4.2 vs 3.7 oz)
- · Covers XS–3XL
- · Retail-tier peer
- · Similar weight (4.2 vs 3.7 oz)
- · Covers XS–4XL
- · Retail-tier peer
- · Similar weight (3.8 vs 3.7 oz)
- · Covers XS–3XL
- · Retail-tier peer
- · Similar weight (4.2 vs 3.7 oz)
- · Retail-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Ringspun Cotton
- Ringspun cotton is yarn spun by twisting cotton fibers into a smooth, tightly wound strand, giving fabric a softer hand and finer print surface than open-end cotton.
- Ribbed Cuffs
- Ribbed cuffs are the stretch rib-knit bands at the sleeve ends of hoodies and sweatshirts, and their recovery determines whether sleeves keep their shape through daily wear.