Shown: Black
BELLA + CANVASStyle 8802 · Tank Tops
Women's Flowy Tank with Side Slit
A blank tank top from the BELLA + CANVAS line, offered in 3 colors in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 65/35 polyester/viscose at 3.7 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 3— Black
Black
Heather Navy
Peach
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/viscose
- Fabric weight
- 3.7 oz/yd²
- Fabric type
- Not stated
- Yarn
- 30 singles
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S
- Colors
- 3
- Country of origin
- Honduras, Viet Nam
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S | 2XL |
|---|---|---|
| Body Length | 17 1/4 | 19 1/2 |
| Body Length Back | 22 | 24 1/4 |
| Chest Width (Laid Flat) | 18 | 25 1/2 |
Fabric and construction
Manufacturer highlights
- 3.7 oz./yd², 65/35 polyester/viscose, 30 singles
- Heather colors are 3.7oz./yd², 52/48 polyester/viscose, 30 singles
- Slub colors are 4 oz./yd²., 50/37.5/12.5 polyester/cotton/rayon, 30 singles
- Relaxed, drapey fit
- Rounded bottom with conservative side slits
- Side seams
- Tear away label
- Responsible Supplier: this product was made in a facility that is Bluesign certified
Country of origin
Made in Honduras or Viet Nam.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Premium merchandise →
Retail-tier cut and hand.
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 65/35 polyester/viscose
- · Similar weight (3.7 vs 3.7 oz)
- · Covers S–2XL
- · Same fabric: 65/35 polyester/viscose
- · Similar weight (3.7 vs 3.7 oz)
- · Covers S–2XL
- · Same fabric: 65/35 polyester/viscose
- · Similar weight (3.7 vs 3.7 oz)
- · Retail-tier peer
- · Same fabric: 65/35 polyester/viscose
- · Similar weight (3.7 vs 3.7 oz)
- · Retail-tier peer
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Singles (Yarn Count)
- Singles is the yarn-count system where a higher number, like 30/1, means finer, thinner yarn, and a lower number, like 18/1, means thicker, coarser yarn.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- bluesign
- bluesign is a chemical-safety certification that screens dyes, finishes, and process chemicals against a restricted-substances list before they ever reach the mill.