Shown: Black/ Cream
Unisex USA-Made Super Heavy Thermal Lined Hooded Sweatshirt
A blank hooded sweatshirt from the Bayside line, offered in 5 colors and sizes M–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 80/20 cotton/polyester at 17 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black/ Cream
Black/ Cream
Bright Orange/ Dark Grey
Caramel Brown/ Cream
Lime Green/ Dark Grey
Navy/ Cream
Available sizes
Availability — Black/ Cream
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 80/20 cotton/polyester
- Fabric weight
- 17 oz/yd²
- Fabric type
- fleece
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- M–3XL
- Colors
- 5
- Country of origin
- United States
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Textured fleece surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Lofted fleece surface — press with slightly higher pressure for full transfer contact.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Non-flat fleece surface reduces DTG detail.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lofted fleece — a water-soluble topping keeps small lettering from sinking.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes M–3XL.
Garment measurements in inches, laid flat.
| Measurement | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|
| Body Length | 28 | 29 | 30 | 31 | 32 | 33 |
| Chest Width (Laid Flat) | 22 | 24 | 26 | 28 | 30 | 32 |
Fabric and construction
Manufacturer highlights
- 17 oz./yd², High quality super heavyweight fabric
- Comprised of 9.5 oz./yd², fleece and 7.5 oz./yd², waffle thermal lining
- Outer fleece is 80/20 cotton/polyester
- Thermal lining is 100% pre-shrunk cotton waffle knit thermal
- Double-lined hood with thermal lining
- Matching drawcords
- Front pouch pocket
- Spandex in cuff and band
Country of origin
Made in United States.
Shown for the Black/ Cream colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 80/20 cotton/polyester
- · Similar weight (17 vs 17 oz)
- · Also Excellent for embroidery
- · Same fabric: 80/20 cotton/polyester
- · Also Excellent for embroidery
- · Covers S–3XL
- · Same fabric: 80/20 cotton/polyester
- · Also Excellent for embroidery
- · Covers S–4XL
- · Same fabric: 80/20 cotton/polyester
- · Also Excellent for embroidery
- · Covers S–4XL
Terms used on this page
- Fleece
- Fleece is a knit fabric with a brushed, napped interior that traps warm air, forming the base of hoodies, crewnecks, and sweatpants.
- Waffle Knit (Thermal)
- Waffle knit (thermal) is a knit fabric with a raised honeycomb grid that traps air for warmth, common in henleys and base-layer tees.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Double-lined hood
- A double-lined hood has a second layer of fabric sewn inside the outer shell, adding warmth, structure, and often a contrast-color interior.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.