Shown: Navy
Men's Tall USA Made Pocket T-Shirt
A blank t-shirt from the Bayside line, offered in Navy and sizes LT–3XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and DTG printing
- 100% pre-shrunk cotton at 6.1 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
- ⚠ Only 0 of 1 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Navy
Navyout of stock
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | Out of Stock | — | |
| XLT | Out of Stock | — | |
| 2XLT | Out of Stock | — | |
| 3XLT | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% pre-shrunk cotton
- Fabric weight
- 6.1 oz/yd²
- Fabric type
- Not stated
- Yarn
- open-end
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- LT–3XLT
- Colors
- 1
- Country of origin
- Currently unavailable
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Excellent
High-cotton smooth knit is the ideal DTG substrate.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes LT–3XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT | 3XLT |
|---|---|---|---|---|
| Body Length | 35 | 36 |
Fabric and construction
Manufacturer highlights
- 6.1 oz./yd²., 100% pre-shrunk cotton, open-end yarn, 18/1
- Heavyweight fabric
- Full cut
- Taped shoulder-to-shoulder
- Double-needle stitched sleeves and bottom hem
- Made in the USA
Country of origin
Made in Currently unavailable.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 100% pre-shrunk cotton
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
- · Same fabric: 100% pre-shrunk cotton
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
- · Similar fiber mix
- · Similar weight (6 vs 6.1 oz)
- · Also Excellent for screen printing
Terms used on this page
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.